Periodic Inspection Criteria:

Driver’s Cab, Chassis, Outriggers, Operator Controls, Load Chart, Safety Devices, Boom, Load Block & Hook must be examined but not limited to:

• Guards and Covers
• Structural members for deformity, cracks, or corrosion
• Bolts, rivets, and other fasteners for loose, failed, or corrosion
• Welds for cracks
• Sheaves and drums for cracks and significant wear
• Pins, bearings, shafts, gears, rollers, and locking devices for distortion, cracks, or significant wear
• Brake & clutch system parts, linings, pawls & ratchets for excessive wear
• Safety devices, indicators, lighting, and operational aids
• Power plants, leaking exhaust, and emergency shut-down features
• Chains and chain drive sprockets for excessive wear or stretch
• Travel steering, brakes, and locking devices
• Tires for damage or excessive wear
• Hydraulic, pneumatic and pressurized hoses, fittings, cylinders, and tubing
• Shaft seals and joints at pump sections and valves
• Outrigger or stabilizer pads/floats, slider pads for excessive wear or cracks
• Electrical components and wiring
• Wire ropes/Cables, Blocks, and hooks will be measured and documented